Nerf Gun

What are the Nerf Guns

Nerf guns are toys which can shoot darts. They are very safe and your child will not hurt himself in any way. Nerf Guns usually use foam for the ammo.

You can find a wide variety of different Nerf Guns, like pistols and auto cannons. The guns are affordable and you can buy the different parts so as to create your own personalised nerf gun at home. Here we give you some tips on how to make the most of your Nerf Gun. All nerf guns have the same use.

There is air pressure which is generated in the Nerf Gun and released behind a projectile, propelling the projectile at your target. For that to happen you need to have three main parts to your Nerf Gun: a pressure chamber, a pump and a trigger mechanism which will be connected to a barrel which has your projectile.

Nerf Gun Parts

The Nerf Guns Pieces

Nerf Gun Pressure Chamber

The pressure chamber is the most vital part of All Nerf Guns. It has inside the air pressure which gives the momentum behind your projectile. The force is connected to how much pressure is produced in the pressure chamber. This means that the most pressure you have, the more force you will have on your Best Nerf Gun. And your darts will go to a greater length and with more speed.

You need to make the pressure chamber strong enough in order to be able to hold all the pressure that will be kept within. The pressure chamber can be made from airtight materials. For example, this can be a plastic soda bottle, another effective material for this use is PVC which is quite strong for the extra pressure. If you want extra force you can get an large pressure chamber and for less force you make a smaller pressure chamber. It depends on how you want your Nerf Gun to be.

Nerf Gun Pump

With the pump you create the pressure that you need in the chamber. You can use a pump with a sliding plunger and rod setup. You can connect the pump directly to the pressure chamber or connect a hose that will be attached to the Nerf Gun chamber and will lead the air inside it. In order to make the air go only towards the chamber you need to make use of a one way valve to isolate the chamber. For that you can use a bicycle pump and the hose can be as long as you like it to be.

Nerf Gun Trigger Mechanism

The trigger mechanism that will be applied to your homemade nerf gun will actually be a valve, like a ball valve, and it will release the air from the pressure into the aim you have chosen. You attach this to the barrel which has the nerf projectile and your gun is ready to go. The barrel again will be of your choice as far as length is concerned. When you choose a long barrel you should keep in mind that you will have more precision but you will need more air pressure as well.

Nerf Gun Assembly

You will choose the body form you like and then you will attach the main parts to it. You connect the pump to the pressure chamber, and then the pressure chamber with the trigger valve to the barrel. You put the projectile into the barrel, you just have to pump the air into the chamber, aim the barrel and fire it by releasing the pressure using the trigger valve. All the parts for you to make your own homemade Nerf Guns in any local hardware or home improvement store.